• sns아이콘sns아이콘
  • sns아이콘sns아이콘
  • sns아이콘sns아이콘
  • sns아이콘sns아이콘

Battery Carriage

더보기

CS-B61MW Battery Powered Lightweight Multipurpose Weaving W…

1. Litium-ion Battery 14.4vdc 4.0Ah, avr 8hours use. 

2. It is a multipourpose weaving welder capable of bottom view, vertical position fillet and butt welding. 

3. The seam is traced by the guide rollers, and the strong magnets are built in the welder. 

4. Controlling the weaving width, the desired leg length can be acquired in 1 time travelling. The weaving width, left stop, right stop and center movement can be electronically controlled. 

5. It can be controlled by the panel controller and the remote controller. 

6. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired. 

7. Using magnet release handle, it can be easily mounted and dismounted. 

더보기

CS-B41S Battery Powered Fillet Stitch and Continuous Welder,…

1. Litium-ion Battery 14.4vdc 4.0Ah, avr 8hours use. 

2. It is a wall travelling fillet welder with stitch function for I & H Beam, and the Beam height should be more than 120mm. 

3. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired. 

4. The stop sensors of its both sides stop the welder automatically when a welding job is completed. 

5. The crater filling function provides excellent welding quality at the beginning and end of welding 

6. Using magnet release handle, it can be easily mounted and dismounted. 

7. It is small and light, so it can be conveniently used and easily moved. 

더보기

CS-B471 Battery Powered Fillet Stitch and Continuous Welder,…

1. Litium-ion Battery 14.4vdc 4.0Ah, avr 8hours use. 

2. It is specialized in fillet multi-pass welding. Adjusting the angle slide of worm gears and the Y slide of forward and backward movement, the position of the torch can be set. 

3. Using a single machine, both of 2 welding ( upper/lower ) parts can be welded. 

4. The multi-pass welding is done when a bigger weld throat is needed. 

5. It can climb up to 75° of inclination, and the stop sensors of its both sides stop the welder automatically when a welding job is completed. 

6. The crater filling function provides excellent welding quality at the beginning and end of welding. 

7. Using magnet release handle, it can be easily mounted and dismounted. 

더보기

CS-B51B Battery Powered Fillet Stitch and Continuous Dual Si…

1. Litium-ion Battery 14.4vdc 4.0Ah, avr 8hours use. 

2. The dual side welding with 2 torches can save time and cost. 

3. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired. 

4. It can climb up to 50° of inclination, and the stop sensors of its both sides stop the welder automatically when a welding job is completed. 

5. The crater filling function provides excellent welding quality at the beginning and end of welding 

6. Using magnet release handle, it can be easily mounted and dismounted. 

더보기

CS-B71 Battery Powered Fillet Stitch and Continuous Welder, …

1. Litium-ion Battery 14.4vdc 4.0Ah, avr 8hours use. 

2. It is a fillet welder with stitch function. 

3. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired. 

4. It can climb up to 75° of inclination, and the stop sensors of its both sides stop the welder automatically when a welding job is completed. 

5. The crater filling function provides excellent welding quality at the beginning and end of welding. 

6. Using magnet release handle, it can be easily mounted and dismounted. 

7. It is small and light, so it can be conveniently used and easily moved. 

더보기

CS-B100C Battery Powered Butt/Fillet Weaving welder with Mag…

1. Litium-ion Battery 14.4vdc 4.0Ah, avr 8hours use. 

2. It is a weaving welder of multi-positions driving on the aluminum rigid rail, and it can be easily controlled by the panel controller and the remote controller. 

3. The stop sensors of its both sides stop the welder automatically when a welding job is completed. 

4. Controlling the weaving width, the desired leg length can be acquired in 1 time travelling. 

5. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired. 

6. The position of the rail can be easily readjusted by the on-off magswitches. 

7. The travel speed in Cm/Min or Inch/Min programmable in acc with the user manual. 

mail